IP АТС Asterisk asterisk:cf

Asterisk:acl.conf

Mon, 12 Mar 2018 15:30:24 +0300

Asterisk:acl.conf acl.conf - конфиг списков контроля доступа (ACL) Asterisk. ; ; Объявленные списки контроля доступа (Access Control Lists (ACLs)) ; Использование списков позволяет гибко назначать доверенные и запрещенные адреса ACL ; ; Данный файл читается при загрузке ; ; CLI команды ; ----------------------------------------------------------- ; acl show Показать все известные списки ACL. ; acl show Отобразить указанный список ACL. ; re…

Asterisk: agents.conf

Sun, 23 Sep 2018 10:56:09 +0300

Asterisk: agents.conf Агенты в Asterisk ACD распределяет входящие вызовы, поступающие в очереди, по агентам или интерфейсам. Агенты описываются в файле конфигурации queues.conf: Глобальные настройки

asterisk:cf:alarmreceiver.conf

Sat, 12 Nov 2016 17:41:53 +0300

; ; alarmreceiver.conf ; ; Sample configuration file for the Asterisk alarm receiver application. ; [general] ; ; Specify a timestamp format for the metadata section of the event files ; Default is %a %b %d, %Y @ %H:%M:%S %Z timestampformat = %a %b %d, %Y @ %H:%M:%S %Z ; ; Specify a command to execute when the caller hangs up ; ; Default is none ; ;eventcmd = yourprogram -yourargs ... ; ; Specify a spool directory for the event files. This setting is required ; if you want the app to be u…

asterisk:alsa.conf

Mon, 12 Mar 2018 15:30:24 +0300

asterisk:alsa.conf 1. make sure that “chan_oss” and “chan_alsa” are compiled while installing asterisk. 2. ensure that “alsa.conf” exists in /etc/asterisk/alsa.conf. I’m simply using the alsa.conf created from the samples file. In case, alsa.conf doesn’t exist, you’ll get the following error, while loading chan_alsa.so.

Asterisk:amd.conf

Mon, 12 Mar 2018 15:30:24 +0300

Asterisk:amd.conf ; ; Распознавание автоответчика на линии. ; [general] total_analysis_time = 5000 ; Максимальное время отведенное на распознавание Человек или Автоответчик. silence_threshold = 256 ;если средний уровень шума в канале менее заданного значения, считать тишиной. ; Greeting ; initial_silence = 2500 ;максимальная длина паузы перед началом сообщения(в миллисекундах). Если превышен , то считается роботом. after_greeting_silence = 800 ; Тишина после сообщения (в миллисекундах).…

Asterisk: app_mysql.conf

Mon, 12 Mar 2018 15:30:24 +0300

Asterisk: app_mysql.conf Конфигурационный файл для аддона MySQL [general] Nullvalue управляет тем, как NULL значения возвращаются из базы данных. В предыдущих версиях, специальное значение NULL возвращалось как

Asterisk:app_skel.conf

Mon, 12 Mar 2018 15:30:24 +0300

Asterisk:app_skel.conf Конфигурационный файл приложения Asterisk app_skel - основа для создания новых приложений для Asterisk. [general] games=3 cheat=no [sounds] prompt=please-enter-your,number,queue-less-than wrong_guess=vm-pls-try-again right_guess=auth-thankyou too_high=high too_low=low lose=vm-goodbye [easy] max_number=10 max_guesses=4 [medium] max_number=100 max_guesses=6 [hard] max_number=1000 max_guesses=7 [nightmare] max_number=1000 max_guesses=1…

Asterisk: ari.conf

Mon, 12 Mar 2018 15:30:24 +0300

Asterisk: ari.conf [general] enabled = yes ; Включить поддержку Asterisk REST Interface. ;pretty = no ; Форматировать ответы ARI в удобный для чтения вид. ;allowed_origins = ; Разделенный запятыми список источников (хостов) обращающихся к ARI. Можно задать * , чтобы разрешить всем. ;auth_realm = ; Облать для аутентификацииRealm to use for authentication. По умолчанию собственно ARI. ; ; Тайм-аут записи по умолчанию для WebSockets. Изменение этого значения может потребоват…

asterisk.conf

Mon, 12 Mar 2018 15:30:24 +0300

asterisk.conf /etc/asterisk/asterisk.conf В файле конфигурации asterisk.conf Вы определяете следующее: * Местоположение, права доступа и владельца сокета, которые используется для подключения удаленной консоли управления сервером.

Пример файла chan_dahdi.conf для интерфейса ISDN PRI E1.

Thu, 14 Apr 2016 13:32:49 +0300

Пример файла chan_dahdi.conf для интерфейса ISDN PRI E1. [channels] group=1 context=from-trunk switchtype = euroisdn signalling = pri_cpe callerid=asreceived usecallerid=yes hidecallerid=no callwaiting=yes overlapdial=yes pridialplan=unknown usecallingpres=yes callwaitingcallerid=yes rxgain=0.0 txgain=0.0 threewaycalling=yes echocancel=yes echocancelwhenbridged=yes faxdetect=both faxbuffers=>8,full channel => 1-15,17-31

Asterisk: iax.conf

Wed, 09 Nov 2016 17:48:51 +0300

Asterisk: iax.conf Inter-Asterisk eXchange используется как для соединения серверов Asterisk, так и для подключения клиентов. Файл iax.conf начинается с общего раздела в котором определены глобальные настройки севера. Также там можно настроить регистрацию на другом сервере Asterisk для совместного использования плана набора (диалплана).…

Asterisk:calendar.conf

Mon, 12 Mar 2018 15:30:24 +0300

Asterisk:calendar.conf Конфигурационный файл модуля res_calendar. API службы календаря Asterisk, это интерфейс для интеграции с внешними серверами календарей. Позволяет читать и записывать события сервера и выполнять на основании полученной информации запланированные действия через диалплан Asterisk.…

ccss.conf

Mon, 12 Mar 2018 15:30:24 +0300

ccss.conf ; ; --- Call Completion Supplementary Services --- ; ; For more information about CCSS, see the CCSS user documentation ; https://wiki.asterisk.org/wiki/display/AST/Call+Completion+Supplementary+Services+(CCSS) ; [general] ; The cc_max_requests option is a global limit on the number of ; CC requests that may be in the Asterisk system at any time. ; ;cc_max_requests = 20 ; ; The cc_STATE_devstate variables listed below can be used to change the ; default mapping of the internal state…

Asterisk: cdr.conf

Mon, 12 Mar 2018 15:30:24 +0300

Asterisk: cdr.conf cdr.conf - Общие (глобальные) настройки детализированного отчета о звонках и выбора бэкендов. Asterisk Call Detail Record engine configuration CDR или Детализированный Отчет Вызовов - сервис обеспечивающий сохранение информации о совершенных вызовах. Информация может быть записана в базы данных, файлы и другие формы хранения данных. Используется для биллинга, предотвращения мошенничества, Системы Оперативно Розыскных Мероприятий (СОРМ), оценки качества обслуживания и т…

Asterisk CDR - Статистика звонков

Fri, 15 Nov 2019 13:53:46 +0300

Asterisk CDR - Статистика звонков CDR - детализированный отчет вызовов. Лог вызовов через ODBC: MySQL, PostgreSQL, TDS и др. Детализированные отчеты о звонках используются для выставления счетов (биллинг), анализа объемов голосового трафика или для отладки Asterisk.

cdr_adaptive_odbc.conf

Mon, 12 Mar 2018 15:30:24 +0300

cdr_adaptive_odbc.conf Модуль cdr_adaptive_odbc позволяет добавлять собственные переменные в CDR, создавать псевдонимы (alias) и фильтровать данные. Добавлять альтернативные таблицы

Asterisk:cdr_custom.conf

Mon, 12 Mar 2018 15:30:24 +0300

Asterisk:cdr_custom.conf cdr_custom.conf - тонкая настройка вывода полей CDR в csv файл. Обычно находится в директории /var/log/asterisk/cdr-custom/...) ; ; Mappings for custom config file ; ; To get your CSV output in a format tailored to your liking, uncomment the ; following lines and look for the output in the cdr-custom directory (usually ; in /var/log/asterisk). Depending on which mapping you uncomment, you may see ; Master.csv, Simple.csv, or both. ; ;[mappings] ;Master.csv => ${CSV_…

cdr_manager.conf

Mon, 12 Mar 2018 15:30:24 +0300

cdr_manager.conf ; ; Asterisk Call Management CDR ; [general] enabled = no ; The "mappings" category can be used to define additional "key: value" pairs ; that will be included in the manager event. (after AccountCode, Source, etc). ; ; Each line like "varname => label" will include a "label: ${CDR(varname)}" ; in the generated event where ${CDR(varname)} its replaced with its value ; ;[mappings] ;rate => Rate ;carrier => Carrier

Asterisk: cdr_mysql.conf

Mon, 12 Mar 2018 15:30:24 +0300

Asterisk: cdr_mysql.conf Параметры подключения к базе данных записи событий CDR. Пример cdr_mysql.conf Этот пример конфигурации, подразумевает, что SQL сервер локальный.

cdr_odbc.conf

Mon, 12 Mar 2018 15:30:24 +0300

cdr_odbc.conf настройка соединения с БД CDR при помощи драйвера ODBC. Устарело, используйте в новых установках cdr_adaptive_odbc.conf ; ; cdr_odbc.conf ; ;[global] ;dsn=MySQL-test ;loguniqueid=yes ;dispositionstring=yes ;table=cdr ;"cdr" is default table name ;usegmtime=no ; set to "yes" to log in GMT ;hrtime=yes ;Enables microsecond accuracy with the billsec and duration fields ;newcdrcolumns=yes ; Enable logging of post-1.8 CDR columns (peeraccount, linkedid, sequence)…

cdr_pgsql.conf

Mon, 12 Mar 2018 15:30:24 +0300

cdr_pgsql.conf Соединение с СУБД PostgreSQL для записи CDR. Устарело, используйте в новых установках cdr_adaptive_odbc.conf ; Sample Asterisk config file for CDR logging to PostgresSQL ; ; Note that you can use TLS connections to your database server. ; This is configured for your PostgreSQL client installation ; on this system (check for pgsessions.conf) [global] ;hostname=localhost ;port=5432 ;dbname=asterisk ;password=password ;user=postgres ;appname=asterisk ; Postgres application_nam…

cdr_sqlite3_custom.conf

Mon, 12 Mar 2018 15:30:24 +0300

cdr_sqlite3_custom.conf изменение полей CDR sqlite3 ; ; Mappings for custom config file ; [master] ; currently, only file "master.db" is supported, with only one table at a time. ;table => cdr ;columns => calldate, clid, dcontext, channel, dstchannel, lastapp, lastdata, duration, billsec, disposition, amaflags, accountcode, uniqueid, userfield, test ;values => '${CDR(start)}','${CDR(clid)}','${CDR(dcontext)}','${CDR(channel)}','${CDR(dstchannel)}','${CDR(lastapp)}','${CDR(lastdata)}','${CDR(…

asterisk:cf:cdr_syslog.conf

Sat, 12 Nov 2016 18:58:31 +0300

; ; Asterisk Call Detail Records (CDR) - Syslog Backend ; ; The cdr_syslog module writes CDRs using the facilities provided by syslog. ; ; Not only must you configure cdr_syslog from this file (cdr_syslog.conf) but ; you will also need to make changes to your /etc/syslog.conf before CDRs will ; be written to syslog. ; ; As an example, you can add the following to /etc/syslog.conf: ; ; local4.info /var/log/asterisk-cdr.log ; ; And then instruct syslogd to re-read the configuration file…

Asterisk: cdr_tds.conf

Mon, 12 Mar 2018 15:30:24 +0300

Asterisk: cdr_tds.conf cdr_tds модуль использует FreeTDS библиотеку для отправки CDR Microsoft SQL Server или Sybase БД. ; ; Asterisk Call Detail Records (CDR) - FreeTDS Backend ; ;[global] ; Connection - соединение ; ; Используйте ключ 'connection' для указания имени подключения в файле 'freedtds.conf' ; 'freetds.conf' это конфигурационный файл библиотеки FreeTDS, а не Asterisk (см. документацию FreeTDS) ; ; http://www.freetds.org/userguide/freetdsconf.htm ; ; Значения: Одно из с…

asterisk:cf:cel.conf

Sat, 12 Nov 2016 18:59:10 +0300

; ; Asterisk Channel Event Logging (CEL) ; ; Channel Event Logging is a mechanism to provide fine-grained event information ; that can be used to generate billing information. Such event information can ; be recorded to various backend modules. ; [general] ; CEL Activation ; ; Use the 'enable' keyword to turn CEL on or off. ; ; Accepted values: yes and no ; Default value: no ;enable=yes ; Application Tracking ; ; Use the 'apps' keyword to specify the list of applications for which you wan…

asterisk:cf:cel_custom.conf

Sat, 12 Nov 2016 19:00:24 +0300

; ; Asterisk Channel Event Logging (CEL) - Custom CSV Backend ; ; This is the configuration file for the customizable CSV backend for CEL ; logging. ; ; In order to create custom CSV logs for CEL, uncomment the template below ; (Master.csv) and start Asterisk. Once CEL events are generated, a file will ; appear in the following location: ; ; /var/log/asterisk/cel-custom/Master.csv ; ; (Note that /var/log/asterisk is the default and may differ on your system) ; ; You can also cr…

asterisk:cf:cel_odbc.conf

Sat, 12 Nov 2016 19:00:41 +0300

; ; Asterisk Channel Event Logging (CEL) - Adaptive ODBC Backend ; ; General module options category. [general] ; Use 'show_user_defined' to put "USER_DEFINED" in the eventtype field, ; instead of (by default) just putting the user defined event name there. ; ;show_user_defined=yes ; This configuration defines the connections and tables for which CEL records ; may be populated. Each context specifies a different CEL table to be used. ; ; The columns in the tables should match up word-for-word…

asterisk:cf:cel_pgsql.conf

Sat, 12 Nov 2016 19:01:00 +0300

; ; Asterisk Channel Event Logging (CEL) - PostgreSQL Backend ; ; Sample Asterisk config file for CEL logging to PostgreSQL ; ; CEL field names: ; ; eventtype ; CHANNEL_START = 1 ; CHANNEL_END = 2 ; HANGUP = 3 ; ANSWER = 4 ; APP_START = 5 ; APP_END = 6 ; BRIDGE_START = 7 ; BRIDGE_END = 8 ; CONF_START = 9 ; CONF_END = 10 ; PARK_START = 11 ; PARK_END = 12 ; BLINDTRANSFER = 13 ; ATTENDEDTRANSFER = 14 ; TRANSFER = 15 ; HOOKFLASH = 16 ; 3WAY_START = 17 ; 3WAY_END …

asterisk:cf:cel_sqlite3_custom.conf

Sat, 12 Nov 2016 19:01:14 +0300

; ; Asterisk Channel Event Logging (CEL) - SQLite 3 Backend ; ; ; Mappings for sqlite3 config file ; ; Within a mapping, use the CALLERID() and CHANNEL() functions to retrieve ; details from the CEL event. There are also a few variables created by this ; module that can be used in a mapping: ; ; eventtype - The name of the CEL event. ; eventtime - The timestamp of the CEL event. ; eventenum - Like eventtype but is "USER_DEFINED" for a user defined event. ; userdeftype - User …

asterisk:cf:cel_tds.conf

Sat, 12 Nov 2016 19:01:35 +0300

; ; Asterisk Channel Event Logging (CEL) - FreeTDS Backend ; ;[global] ; Connection ; ; Use the 'connection' keyword to specify one of the instance names from your ; 'freetds.conf' file. Note that 'freetds.conf' is not an Asterisk ; configuration file, but one specific to the FreeTDS library. See the FreeTDS ; documentation on 'freetds.conf' for more information: ; ; http://www.freetds.org/userguide/freetdsconf.htm ; ; Accepted values: One of the connections specified in freetds.conf…

chan_dahdi.conf

Sat, 12 Nov 2016 18:41:54 +0300

chan_dahdi.conf ; ; DAHDI Telephony Configuration file ; ; You need to restart Asterisk to re-configure the DAHDI channel ; CLI> module reload chan_dahdi.so ; will reload the configuration file, but not all configuration options ; are re-configured during a reload (signalling, as well as PRI and ; SS7-related settings cannot be changed on a reload). ; ; This file documents many configuration variables. Normally unless you know ; what a variable means or that it should be change…

Настройка DAHDI - chan_dahdi

Mon, 12 Mar 2018 15:30:24 +0300

Настройка DAHDI - chan_dahdi Драйвер DAHDI отвечает за работу плат интерфейсов телефонии устанавливаемых непосредственно в сервер или работающих по

asterisk:cf:chan_mobile.conf

Sat, 12 Nov 2016 19:02:07 +0300

; ; chan_mobile.conf ; configuration file for chan_mobile ; [general] interval=30 ; Number of seconds between trying to connect to devices. ; The following is a list of adapters we use. ; id must be unique and address is the bdaddr of the adapter from hciconfig. ; Each adapter may only have one device (headset or phone) connected at a time. ; Add an [adapter] entry for each adapter you have. [adapter] id=blue address=00:09:DD:60:01:A3 ;forcemaster=yes ; attempt to force adapter into master …

Настройка SIP в Asterisk - sip.conf

Mon, 12 Mar 2018 15:30:24 +0300

Настройка SIP в Asterisk - sip.conf [asterisk sip.conf] Файл 'sip.conf' отвечает за настройку внутренних и внешних каналов SIP в Asterisk. Объекты конфигурации - пиры, описываются в отдельных секциях, которые обозначаются именами в [квадратных скобках]. Действует принцип наследования, как и в большинстве конфигов Asterisk: все что задано после имени в квадратных скобках, относится к одному объекту, пока не будет объявлен следующий.…

Asterisk sip.conf General SIP Options

Mon, 12 Mar 2018 15:30:24 +0300

Asterisk sip.conf General SIP Options Полный список параметров general sip.conf Следующие параметры используются в общей [general] секции sip.conf: allowexternalinvites Если установлено 'no', запрещает INVITE и REFER от внешних (не из localnet) доменов. См

asterisk:cf:cli.conf

Mon, 14 Nov 2016 11:28:20 +0300

; ; Asterisk CLI configuration ; [startup_commands] ; ; Any commands listed in this section will get automatically executed ; when Asterisk starts as a daemon or foreground process (-c). ; ;sip set debug on = yes ;core set verbose 3 = yes ;core set debug 1 = yes

asterisk:cf:cli_aliases.conf

Sat, 12 Nov 2016 19:02:53 +0300

; ; CLI Aliases configuration ; ; This module also registers a "cli show aliases" CLI command to list ; configured CLI aliases. [general] ; Here you define what alias templates you want to use. You can also define ; multiple templates to use as well. If you do, and there is a conflict, then ; the first alias defined will win. ; template = friendly ; By default, include friendly aliases ;template = asterisk_1dot2 ; Asterisk 1.2 style syntax ;template = asterisk_1dot4 ; Asterisk 1.4 style syntax…

asterisk:cf:cli_permissions.conf

Sat, 12 Nov 2016 19:03:13 +0300

; ; CLI permissions configuration example for Asterisk ; ; All the users that you want to connect with asterisk using ; rasterisk, should have write/read access to the ; asterisk socket (asterisk.ctl). You could change the permissions ; of this file in 'asterisk.conf' config parameter: 'astctlpermissions' (0666) ; found on the [files] section. ; ; general options: ; ; default_perm = permit | deny ; This is the default permissions to apply for a user that ; does not …

asterisk:cf:codecs.conf

Sat, 12 Nov 2016 19:03:29 +0300

[speex] ; CBR encoding quality [0..10] ; used only when vbr = false quality => 3 ; codec complexity [0..10] ; tradeoff between cpu/quality complexity => 2 ; perceptual enhancement [true / false] ; improves clarity of decoded speech enhancement => true ; voice activity detection [true / false] ; reduces bitrate when no voice detected, used only for CBR ; (implicit in VBR/ABR) vad => true ; variable bit rate [true / false] ; uses bit rate proportionate to voice complexity vbr => true ; availa…

Asterisk: confbridge.conf

Mon, 12 Mar 2018 15:30:24 +0300

Asterisk: confbridge.conf Confbridge.conf - файл конфигурации конференций в Asterisk. Содержит категории профилей пользователей конференции и профилей конференц-мостов, а также настройки меню управления конференциями.

config_test.conf

Sat, 12 Nov 2016 18:40:44 +0300

config_test.conf ; Config to test config parsing ; global and item have values that differ from defaults ; global_defaults and item_defaults are to show all defaults are set ; there should be an option for every default type, and a custom type [global] intopt=-1 uintopt=1 doubleopt=0.1 sockaddropt=1.2.3.4:1234 boolopt=true boolflag1=true boolflag2=false boolflag3=true deny=0.0.0.0/0 permit=1.2.3.4/32 codecopt=!all,ulaw,g729 stropt=test customopt=yes [global_defaults] [item] intopt=-1 uintop…

asterisk:cf:console.conf

Sat, 12 Nov 2016 19:04:02 +0300

; ; Configuration for chan_console, a cross-platform console channel driver. ; [general] ; Set this option to "yes" to enable automatically answering calls on the ; console. This is very useful if the console is used as an intercom. ; The default value is "no". ; ;autoanswer = no ; Set the default context to use for outgoing calls. This can be overridden by ; dialing some extension@context, unless the overridecontext option is enabled. ; The default is "default". ; ;context = default ; Set…

asterisk:cf:dbsep.conf

Sat, 12 Nov 2016 19:04:21 +0300

# # Configuration file for dbsep.cgi # # The purpose of this file is to provide realtime access to a database, # possibly through ODBC, without needing to load the ODBC drivers into # Asterisk, since there are several backend drivers which are rather # buggy. # # We accomplish this separation by using the res_config_curl realtime # driver to connect to a server running dbsep.cgi (or another, which # implements the same protocol). # # This file contains the information necessary to configure dbse…

extensions.conf [general]

Sat, 12 Nov 2016 18:25:35 +0300

extensions.conf [general] Вверху файла “extensions.conf” должен быть сегмент с меткой [general] Здесь вы определяете несколько главных опций относительно Диалплана.

asterisk:cf:dnsmgr.conf

Sat, 12 Nov 2016 19:04:46 +0300

[general] ;enable=yes ; enable creation of managed DNS lookups ; default is 'no' ;refreshinterval=1200 ; refresh managed DNS lookups every seconds ; default is 300 (5 minutes)

asterisk:cf:dsp.conf

Sat, 12 Nov 2016 19:05:04 +0300

[default] ; ; Length of sound (in milliseconds) before a period of silence is considered ; to be a change from talking to silence or a period of noise converts silence ; to talking. [default=256] ; ;silencethreshold=256 ; DTMF Reverse Twist and Normal Twist is the difference in power between the row and column energies. ; ; Normal Twist is where the row energy is greater than the column energy. ; Reverse Twist is where the column energy is greater. ; ; Power level difference between frequencie…

asterisk:cf:dundi.conf

Sat, 12 Nov 2016 19:05:24 +0300

; ; DUNDi configuration file ; ; For more information about DUNDi, see http://www.dundi.com ; ; [general] ; ; The "general" section contains general parameters relating ; to the operation of the dundi client and server. ; ; The first part should be your complete contact information ; should someone else in your peer group need to contact you. ; ;department=Your Department ;organization=Your Company, Inc. ;locality=Your City ;stateprov=ST ;country=US ;email=your@email.com ;phone=+12565551212 ; ; …

asterisk:cf:enum.conf

Sat, 12 Nov 2016 19:05:37 +0300

; ; ENUM Configuration for resolving phone numbers over DNS ; ; Sample config for Asterisk ; This file is reloaded at "module reload enum" in the CLI ; [general] ; ; The search list for domains may be customized. Domains are searched ; in the order they are listed here. ; search => e164.arpa ; ; If you'd like to use the E.164.org public ENUM registry in addition ; to the official e164.arpa one, uncomment the following line ; ;search => e164.org ; ; As there are more H323 drivers available you h…

Asterisk Realtime: extconfig.conf

Tue, 03 Jul 2018 17:45:33 +0300

Asterisk Realtime: extconfig.conf Реалтайм Архитектура Asterisk - набор драйверов и функций для конфигурации в режиме реального времени. Существует два типа

asterisk:cf:extensions.ael

Sat, 12 Nov 2016 19:06:11 +0300

// // Example AEL config file // // // Static extension configuration file, used by // the pbx_ael module. This is where you configure all your // inbound and outbound calls in Asterisk. // // This configuration file is reloaded // - With the "ael reload" command in the CLI // - With the "reload" command (that reloads everything) in the CLI // The "Globals" category contains global variables that can be referenced // in the dialplan by using the GLOBAL dialplan function: // ${GLOBAL(VARIABLE)}…

extensions.conf - Dialplan

Wed, 14 May 2014 10:40:21 +0300

extensions.conf - Dialplan Конфигурация плана набора содержится в файле конфигурации Asterisk - extensions.conf. Это один из самых важных конфигурационных файлов. В нем определяется обработка и маршрутизация входящих и исходящих вызовов. Этот файл управляет поведением всех соединений проходящих через Вашу…

asterisk:cf:extensions.lua

Sat, 12 Nov 2016 19:06:44 +0300

CONSOLE = "Console/dsp" -- Console interface for demo --CONSOLE = "DAHDI/1" --CONSOLE = "Phone/phone0" IAXINFO = "guest" -- IAXtel username/password --IAXINFO = "myuser:mypass" TRUNK = "DAHDI/G2" TRUNKMSD = 1 -- TRUNK = "IAX2/user:pass@provider" -- -- Extensions are expected to be defined in a global table named 'extensions'. -- The 'extensions' table should have a group of tables in it, each -- representing a context. Extensions are defined in each context. See below -- for examples…

Введение в контексты и екстеншены сервера Asterisk

Wed, 14 May 2014 10:41:08 +0300

Введение в контексты и екстеншены сервера Asterisk План набора состоит из контекстов. Определение контекстов - самая важная часть файла extensions.conf и самая важная часть конфигурации сервера Asterisk.

asterisk:cf:extensions_minivm.conf

Sat, 12 Nov 2016 19:07:06 +0300

; MINI-VOICEMAIL dialplan example ; --------------------------------------------------------------------------------------- ; ; This is an example on how to use the Mini-Voicemail system to build ; voicemail systems. ; ;.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- ; A macro to test the MINIVMACCOUNT dialplan function ; Currently, accountcode and pincode is not used in the application ; They where added to be used in dialplan scripting ; ; [macro-…

Asterisk коды абонентских функций - features.conf

Thu, 18 Apr 2019 20:28:39 +0300

[Asterisk features] Asterisk коды абонентских функций - features.conf В файле features.conf назначаются пользовательские коды и опции абонентских функций Asterisk, такие как: перевод вызова (transfer); перехват вызова (pickup); запись по требованию (record on demand); таймауты набора и переадресации (digit timeout); паркинг (park) и др.…

asterisk:cf:festival.conf

Sat, 12 Nov 2016 19:07:27 +0300

; ; Festival Configuration ; [general] ; ; Host which runs the festival server (default : localhost); ; ;host=localhost ; ; Port on host where the festival server runs (default : 1314) ; ;port=1314 ; ; Use cache (yes, no - defaults to no) ; ;usecache=yes ; ; If usecache=yes, a directory to store waveform cache files. ; The cache is never cleared (yet), so you must take care of cleaning it ; yourself (just delete any or all files from the cache). ; THIS DIRECTORY *MUST* EXIST and must be writable…

Asterisk: followme.conf

Sat, 02 Jun 2018 15:19:42 +0300

[asterisk followme] Asterisk: followme.conf Follow Me - настройка предустановленной переадресации вызова - Следуй За Мной. Asterisk Follow Me Конфигурационный файл /etc/asterisk/followme.conf

Asterisk func_odbc

Fri, 11 May 2018 13:23:04 +0300

Asterisk func_odbc SQL операции func_odbc.conf, как функции диалплана Asterisk. Подробное руководство. Примеры. Основы func_odbc Имена функций (контекстов) рекомендуется задавать в верхнем регистре, но, тем не менее, имена чувствительны к регистру.

h323.conf

Tue, 12 Aug 2014 12:37:37 +0300

h323.conf драйвер конфигурации H323 ; [general] port = 1720 bindaddr = 0.0.0.0 ;tos=lowdelay Вы можете указать глобальный флаг AMA по умолчанию для вызовов iaxtel. Это может быть один из 'default', 'omit', 'billing', или 'documentation'. Эти флаги используются в генерации данных, детализованных по вызову. (Смотри Asterisk

asterisk:cf:hep.conf

Sat, 12 Nov 2016 19:08:11 +0300

; ; res_hep Module configuration for Asterisk ; ; All settings are currently set in the general section. [general] enabled = no ; Enable/disable forwarding of packets to a ; HEP server. Default is "yes". capture_address = 192.168.1.1:9061 ; The address of the HEP capture server. capture_password = foo ; If specified, the authorization passsword ; for the HEP server. If not specified, no …

asterisk:cf:http.conf

Sat, 12 Nov 2016 19:08:33 +0300

; ; Asterisk Builtin mini-HTTP server ; ; ; Note about Asterisk documentation: ; If Asterisk was installed from a tarball, then the HTML documentation should ; be installed in the static-http/docs directory which is ; (/var/lib/asterisk/static-http/docs) on linux by default. If the Asterisk ; HTTP server is enabled in this file by setting the "enabled", "bindaddr", ; and "bindport" options, then you should be able to view the documentation ; remotely by browsing to: ; http://<…

Asterisk: iax.conf

Mon, 21 Nov 2016 09:50:33 +0300

Asterisk: iax.conf В файле iax.conf вы описываете ваши соединения по протоколу IAX. Настройка IAX клиентов. Выдержка из примера конфигурации файла IAX.CONF, который идет в дистрибутиве:

asterisk:cf:iaxprov.conf

Sat, 12 Nov 2016 19:08:51 +0300

; ; IAX2 Provisioning Information ; ; Contains provisioning information for templates and for specific service ; entries. ; ; Templates provide a group of settings from which provisioning takes place. ; A template may be based upon any template that has been specified before ; it. If the template that an entry is based on is not specified then it is ; presumed to be 'default' (unless it is the first of course). ; ; Templates which begin with 'si-' are used for provisioning units with ; specific…

asterisk:cf:indications.conf

Sat, 12 Nov 2016 19:09:18 +0300

; ; indications.conf ; ; Configuration file for location specific tone indications ; ; ; NOTE: ; When adding countries to this file, please keep them in alphabetical ; order according to the 2-character country codes! ; ; The [general] category is for certain global variables. ; All other categories are interpreted as location specific indications ; [general] country=us ; default location ; [example] ; description = string ; The full name of your country, in English. ; ringcadenc…

Asterisk logger.conf

Wed, 26 Sep 2018 00:36:04 +0300

Asterisk logger.conf Настройка логов Asterisk. В данном файле настраивается журналирование событий Asterisk в файлы, консоль и syslog linux. Для применения настроек выполните команду

asterisk:cf:manager.conf

Sat, 12 Nov 2016 19:09:47 +0300

; ; AMI - The Asterisk Manager Interface ; ; Third party application call management support and PBX event supervision ; ; Use the "manager show commands" at the CLI to list available manager commands ; and their authorization levels. ; ; "manager show command " will show a help text. ; ; ---------------------------- SECURITY NOTE ------------------------------- ; Note that you should not enable the AMI on a public IP address. If needed, ; block this TCP port with iptables (or another F…

asterisk:cf:meetme.conf

Sat, 12 Nov 2016 19:10:05 +0300

; ; Configuration file for MeetMe simple conference rooms for Asterisk of course. ; ; This configuration file is read every time you call app meetme() [general] ;audiobuffers=32 ; The number of 20ms audio buffers to be used ; when feeding audio frames from non-DAHDI channels ; into the conference; larger numbers will allow ; for the conference to 'de-jitter' audio that arrives ; at different timing than the conference's timing ; source, but can also allow for latency in hearing …

asterisk:cf:mgcp.conf

Sat, 12 Nov 2016 19:10:19 +0300

; ; MGCP Configuration for Asterisk ; [general] ;port = 2427 ;bindaddr = 0.0.0.0 ; See https://wiki.asterisk.org/wiki/display/AST/IP+Quality+of+Service for a description of these parameters. ;tos=cs3 ; Sets TOS for signaling packets. ;tos_audio=ef ; Sets TOS for RTP audio packets. ;cos=3 ; Sets 802.1p priority for signaling packets. ;cos_audio=5 ; Sets 802.1p priority for RTP audio packets. ; --------------------- DIGIT TIMEOUTS ---------------------------- firstdigittimeout = 30000 ; def…

asterisk:cf:minivm.conf

Sat, 12 Nov 2016 19:10:35 +0300

; ; Mini-Voicemail Configuration ; for the MiniVM set of applications ; ; MiniVM consists of the following dialplan applications ; MinivmGreet Play personal prompts for busy/unavailable/temporary messages or default prompts ; MinivmRecord Record voice prompts to account directory or default directory ; MinivmNotify Notify via e-mail or pager - with or without attachment ; MinivmDelete Delete voice prompt (filename as argument or channel variable set by MinivmRecord) …

asterisk:cf:misdn.conf

Sat, 12 Nov 2016 19:10:50 +0300

; ; chan_misdn sample config ; ; general section: ; ; for debugging and general setup, things that are not bound to port groups ; [general] ; ; Sets the Path to the misdn-init.conf (for nt_ptp mode checking) ; misdn_init=/etc/misdn-init.conf ; set debugging flag: ; 0 - No Debug ; 1 - mISDN Messages and * - Messages, and * - State changes ; 2 - Messages + Message specific Informations (e.g. bearer capability) ; 3 - very Verbose, the above + lots of Driver specific infos ; 4 - even mo…

asterisk:cf:modules.conf

Sat, 12 Nov 2016 19:11:04 +0300

; ; Asterisk configuration file ; ; Module Loader configuration file ; [modules] autoload=yes ; ; Any modules that need to be loaded before the Asterisk core has been ; initialized (just after the logger has been initialized) can be loaded ; using 'preload'. This will frequently be needed if you wish to map all ; module configuration files into Realtime storage, since the Realtime ; driver will need to be loaded before the modules using those configuration ; files are initialized. ; ; An exampl…

asterisk:cf:motif.conf

Sat, 12 Nov 2016 19:11:18 +0300

,code> ; Sample configuration file for chan_motif ; Transports ; ; There are three different transports and protocol derivatives supported by chan_motif. They are in order of preference: ; Jingle using ICE-UDP, Google Jingle, and Google-V1. ; ; Jingle as defined in XEP-0166 supports the widest range of features. It is referred to as

Asterisk: MOH

Fri, 28 Oct 2016 10:40:08 +0300

Asterisk: MOH ; ; Music on Hold -- Sample Configuration ; [general] ;cachertclasses=yes ; use 1 instance of moh class for all users who are using it, ; decrease consumable cpu cycles and memory ; disabled by default ;preferchannelclass=yes ; Prefer the musicclass as defined by CHANNEL(musicclass), ; over a class set by an application (e.g. a musicclass set on a queue). ; Defaults to yes. ; val…

asterisk:cf:muted.conf

Sat, 12 Nov 2016 19:11:56 +0300

# # Sample muted configuration file # # Copyright (C) 2004 Digium, Inc. # # First you have the host, username, and password # we use to connect to the asterisk system # # What is this? Well, haven't you ever wished you could automatically # turn down the volume on your stereo, CDPlayer, etc, when a call comes in, # and then return it to normal when the call ends? Well, this is a possible # mechanism to make this happen! # You have to fire up the new utils/muted, which runs as a daemon in the # b…

asterisk:cf:ooh323.conf

Fri, 11 Nov 2016 15:27:34 +0300

; --------------------------------------------------------------------------------- ; --- ******* IMPORTANT NOTE *********** ; --- ; --- This module is currently unsupported. Use it at your own risk. ; --- ; --------------------------------------------------------------------------------- ; Objective System's H323 Configuration example for Asterisk ; ooh323c driver configuration ; ; [general] section defines global parameters ; ; This is followed by profiles which can be of three types - use…

asterisk:cf:osp.conf

Sat, 12 Nov 2016 19:12:15 +0300

; ; Open Settlement Protocol Sample Configuration File ; ; This file contains configuration of OSP server providers that are used by the ; Asterisk OSP module. The section "general" is reserved for global options. ; All other sections describe specific OSP Providers. The provider "default" ; is used when no provider is otherwise specified. ; ; The "servicepoint" and "source" parameters must be configured. For most ; implementations the other parameters in this file can be left unchanged. ; [g…

asterisk:cf:oss.conf

Sat, 12 Nov 2016 19:12:33 +0300

; ; Automatically generated from ../channels/chan_oss.c ; [general] ; General config options, with default values shown. ; You should use one section per device, with [general] being used ; for the first device and also as a template for other devices. ; ; All but 'debug' can go also in the device-specific sections. ; ; debug = 0x0 ; misc debug flags, default is 0 ; Set the device to use for I/O ; device = /dev/dsp ; Optional mixer command to run upon …

Имена екстеншенов и шаблоны в плане набора Asterisk.

Fri, 11 Nov 2016 13:33:32 +0300

Имена екстеншенов и шаблоны в плане набора Asterisk. Имена екстеншенов. Именами для екстеншенов в плане набора могут быть обычные номера, такие как “412” или “0”. Также они могут состоять из букв или строк, содержащих, как цифры, так и буквы, например, “john” или “A93”. Однако, на обычном телефоне невозможно набрать номер екстеншена, такой как “john”, там просто нет таких символов. Однако, на некоторых телефонных аппаратах можно исхитриться и набрать такой номер (например, на телефонах Cisco, …

asterisk:cf:phone.conf

Sat, 12 Nov 2016 19:12:58 +0300

; ; Linux Telephony Interface ; ; Configuration file ; [interfaces] ; ; Select a mode, either the phone jack provides dialtone, reads digits, ; then starts PBX with the given extension (dialtone mode), or ; immediately provides the PBX without reading any digits or providing ; any dialtone (this is the immediate mode, the default). Also, you ; can set the mode to "fxo" if you have a linejack to make it operate ; properly. If you are using a Sigma Designs board you may set this to ; "sig". ; mod…

asterisk:cf:phoneprov.conf

Sat, 12 Nov 2016 19:13:12 +0300

[general] ; This section applies only to the default sip.conf/users.conf config provider ; embedded in res_phoneprov. Other providers may provide their own default settings. ; The default behavior of res_phoneprov will be to set the SERVER template variable to ; the IP address that the phone uses to contact the provisioning server and the ; SERVER_PORT variable to the bindport setting in sip.conf. Unless you have a very ; unusual setup, you should not need to set serveraddr, serveriface, or s…

pjproject.conf

Sat, 12 Nov 2016 18:37:06 +0300

pjproject.conf ; Common pjproject options ; ;========================LOG_MAPPINGS SECTION OPTIONS=============================== ;[log_mappings] ; SYNOPSIS: Provides pjproject to Asterisk log level mappings. ; NOTES: The name of this section in the pjproject.conf configuration file must ; remain log_mappings or the configuration will not be applied. ; The defaults mentioned below only apply if this file or the 'log_mappings' ; object can'tbe found. If the object is …

pjsip.conf

Sat, 12 Nov 2016 19:25:40 +0300

pjsip.conf ; PJSIP Configuration Samples and Quick Reference ; ; This file has several very basic configuration examples, to serve as a quick ; reference to jog your memory when you need to write up a new configuration. ; It is not intended to teach PJSIP configuration or serve as an exhaustive ; reference of options and potential scenarios. ; ; This file has two main sections. ; First, manually written examples to serve as a handy reference. ; Second, a list of all possible PJSIP config optio…

asterisk:cf:pjsip_notify.conf

Sat, 12 Nov 2016 19:13:52 +0300

; rfc3842 ; put empty "Content=>" at the end to have CRLF after last body line [clear-mwi] Event=>message-summary Content-type=>application/simple-message-summary Content=>Messages-Waiting: no Content=>Message-Account: sip:asterisk@127.0.0.1 Content=>Voice-Message: 0/0 (0/0) Content=> ; Aastra [aastra-check-cfg] Event=>check-sync [aastra-xml] Event=>aastra-xml ; Digium [digium-check-cfg] Event=>check-sync ; Linksys [linksys-cold-restart] Event=>reboot_now [linksys-warm-restart] Event=>r…

asterisk:cf:pjsip_wizard.conf

Sat, 12 Nov 2016 19:14:05 +0300

; PJSIP Wizard Configuration Samples and Quick Reference ; ; This file has several very basic configuration examples, to serve as a quick ; reference to jog your memory when you need to write up a new configuration. ; It is not intended to teach PJSIP configuration or serve as an exhaustive ; reference of options and potential scenarios. ; ; This file has two main sections. ; First, manually written examples to serve as a handy reference. ; Second, a list of all possible PJSIP config options by …

Asterisk queuerules.conf

Sat, 17 Dec 2016 18:05:40 +0300

Asterisk queuerules.conf queuerules - правила позволяющие динамически изменять значения переменных QUEUE_MIN_PENALTY и QUEUE_MAX_PENALTY, в зависимости от времени ожидания вызывающего абонента.

Asterisk настройка очереди - queues.conf

Mon, 12 Mar 2018 17:04:15 +0300

Asterisk настройка очереди - queues.conf Очередь входящих вызовов Asterisk. Подробное описание стратегии вызовов. Penalty, timeout, member и все доступные параметры. Примеры.

asterisk:cf:res_config_mysql.conf

Sat, 12 Nov 2016 19:14:32 +0300

; ; Sample configuration for res_config_mysql.c ; ; The value of dbhost may be either a hostname or an IP address. ; If dbhost is commented out or the string "localhost", a connection ; to the local host is assumed and dbsock is used instead of TCP/IP ; to connect to the server. If no dbcharset is specified, the connection ; is made with no extra charset configurations sent to MySQL, leaving all ; configured MySQL charset options and defaults untouched. ; ; Multiple database contexts may be co…

asterisk:cf:res_config_sqlite.conf

Sat, 12 Nov 2016 19:14:52 +0300

[general] ; The database file. dbfile => /var/lib/asterisk/sqlite.db ; Both config_table and cdr_table are optional. If config_table is omitted, ; you must specify it in extconfig.conf. If it is both provided here and in ; extconfig.conf, the value given here is used. If cdr_table is omitted, CDR ; support is simply disabled. config_table => ast_config cdr_table => ast_cdr

asterisk:cf:res_config_sqlite3.conf

Sat, 12 Nov 2016 19:15:09 +0300

; Define a realtime database name to use in extconfig.conf ; ;[asterisk] ;dbfile => /var/lib/asterisk/realtime.sqlite3 ; ; debug - Turn on debugging information ;debug=yes ; ; requirements - At startup, each realtime family will make requirements ; on the backend. There are several strategies for handling requirements: ; warn - Warn if the required column does not exist. ; createclose - Create columns as close to the requirements as possible. ; createchar - Create char col…

asterisk:cf:res_corosync.conf

Sat, 12 Nov 2016 19:15:22 +0300

; ; Sample configuration file for res_corosync. ; ; This module allows events to be shared amongst a local cluster of ; Asterisk servers. Specifically, the types of events that may be ; shared include: ; ; - Device State (for shared presence information) ; ; - Message Waiting Indication, or MWI (to allow Voicemail to live on ; a server that is different from where the phones are registered) ; ; For more information about Corosync, see: http://www.corosync.org/ ; [general] ; ; Publish…

asterisk:cf:res_curl.conf

Sat, 12 Nov 2016 19:15:34 +0300

; ; CURLOPT global settings (mostly set for realtime) ; [globals] ;proxy=myproxy.example.com proxytype=http proxyport=8001 ;proxyuserpwd=asterisk:asteriskrocks

asterisk:cf:res_fax.conf

Sat, 12 Nov 2016 19:15:51 +0300

; Generic Fax Application configuration [general] ; Maximum Transmission Rate ; Possible values are { 2400 | 4800 | 7200 | 9600 | 12000 | 14400 } ; Set this value to the maximum desired transfer rate. Default: 14400 ;maxrate=14400 ; Minimum Transmission Rate ; Possible values are { 2400 | 4800 | 7200 | 9600 | 12000 | 14400 } ; Set this value to the minimum desired transfer rate. Default: 4800 ;minrate=4800 ; Send Progress/Status events to manager session ; Manager events with 'call' class …

asterisk:cf:res_ldap.conf

Sat, 12 Nov 2016 19:16:04 +0300

; ; Configuration file for res_config_ldap ; ; Realtime configuration ; ---------------------- ; In order to use this module, you start ; in extconfig.conf with a configuration like this: ; ; sippeers = ldap,"dc=myDomain,dc=myDomainExt",sip ; extensions = ldap,"dc=myDomain,dc=myDomainExt",extensions ; sip.conf = ldap,"dc=myDomain,dc=myDomainExt",config ; ; In the case of LDAP the last keyword in each line above specifies ; a section in this file. ; ; LDAP schema and ldif files can be locate…

Asterisk: res_odbc.conf

Sun, 18 Dec 2016 19:05:19 +0300

Asterisk: res_odbc.conf Файл настройки соединений c базами данных через unixODBC. MySQL, PostgreSQL, MSSQL, SQLite. Параметры ODBC соединений [ENV] - Глобальные переменные

asterisk:cf:res_parking.conf

Sat, 12 Nov 2016 19:16:32 +0300

[general] ;parkeddynamic = yes ; Enables dynamically created parkinglots. (default is no) ; If the option is enabled then the following ; variables can be used to dynamically create ; new parking lots. ; ; The PARKINGDYNAMIC variable specifies the ; parking lot to use as a template to create …

asterisk:cf:res_pgsql.conf

Sat, 12 Nov 2016 19:16:46 +0300

; ; Sample configuration for res_config_pgsql ; ; The value of dbhost may be either a hostname or an IP address. ; If dbhost is commented out or the string "localhost", a connection ; to the local host is assumed and dbsock is used instead of TCP/IP ; to connect to the server. ; [general] dbhost=127.0.0.1 dbport=5432 dbname=asterisk dbuser=asterisk dbpass=password ;dbappname=asterisk ; Postgres application_name support (optional). Whitespace not allowed. ; ; dbsock is specified as the directo…

Asterisk res_pjsip_acl

Sun, 25 Dec 2016 17:34:20 +0300

Asterisk res_pjsip_acl SIP ACL module Документация по конфигурации и использованию функций модуля res_pjsip_acl. ACL модуль используется res_pjsip. Данный модуль не зависит от ENDPOINTs и управляет всеми входящими подключениями через res_pjsip. Есть два основных способа назначить

asterisk:cf:res_pktccops.conf

Sat, 12 Nov 2016 19:17:16 +0300

;; Sample res_pktccops.conf ; ;[general] ;gateinfoperiod => 60 ; default 60s ;gatetimeout = 150 ; default 150 ;t1 => 250 ; default 250s ;t7 => 200 ; default 200s ;t8 => 300 ; default 300s ;keepalive => 60 ; default 60s ; ;[teszt] ;host => 192.168.0.24 ;pool => 10.0.1.0 10.0.1.255 ;pool => 10.0.3.0 10.0.3.255 ;pool => 10.0.7.0 10.0.8.255 ;pool => 10.0.10.0 10.0.11.255 ; ;[general] ;gateinfoperiod => 60 ; default 60s ;gatetimeout = 150 ; default 150 ;t1 => 250 ; default 250s ;t7 => 200 ; default 2…

asterisk:cf:res_snmp.conf

Sat, 12 Nov 2016 19:17:41 +0300

; ; Configuration file for res_snmp ; -------------------------------- ; ; Res_snmp can run as a subagent or standalone SNMP agent. The standalone snmp ; agent is based on net-snmp and will read a configuration file called ; asterisk.conf in the net-snmp configuration file path, starting with ; /etc/snmp on many systems. ; ; If you use the subagent model, you need to enable agentx in snmpd.conf ; Note that you can only run one Asterisk on the system in this case. ; ; See https://wiki.asterisk.or…

asterisk:cf:res_stun_monitor.conf

Sat, 12 Nov 2016 19:17:53 +0300

; ; Configuration file for the res_stun_monitor module ; ; The res_stun_monitor module sends STUN requests to a configured STUN server ; periodically. If the monitor detects a change in the external IP address or port ; provided by the STUN server an event is sent out internally within Asterisk ; to alert all listeners to that event of the change. ; The current default listeners for the network change event include chan_sip ; and chan_iax. Both of these channel drivers by default react to thi…

asterisk:cf:resolver_unbound.conf

Sat, 12 Nov 2016 19:18:06 +0300

; Unbound DNS Resolver Configuration ; ; This file serves as a reference for the configurable options within the ; unbound DNS resolver. [general] ;hosts = /etc/hosts ; Full path to a hosts file which contains a mapping of ; ; hostnames to addresses. If "system" is specified then ; ; the system specific hosts file will be used. (default: system) ;resolv = /etc/resolv.conf ; Full path to a resolv.conf which contains the nameservers ; …

asterisk:cf:rtp.conf

Sat, 12 Nov 2016 19:18:26 +0300

; ; RTP Configuration ; [general] ; ; RTP start and RTP end configure start and end addresses ; ; Defaults are rtpstart=5000 and rtpend=31000 ; rtpstart=10000 rtpend=20000 ; ; Whether to enable or disable UDP checksums on RTP traffic ; ;rtpchecksums=no ; ; The amount of time a DTMF digit with no 'end' marker should be ; allowed to continue (in 'samples', 1/8000 of a second) ; ;dtmftimeout=3000 ; rtcpinterval = 5000 ; Milliseconds between rtcp reports ;(min 500, max 60000, default 5000) ; ; E…

asterisk:cf:say.conf

Sat, 12 Nov 2016 19:18:42 +0300

; ; language configuration ; [general] mode=old ; method for playing numbers and dates ; old - using asterisk core function ; new - using this configuration file ; The new language routines produce strings of the form ; prefix:[format:]data ; that are matched against the rules in this file to produce ; an output. ; ; The data is generally the string to be spelled (either a number, ; an ascii string or a date/time in the format specified below). ; It is available, in the right hand side of …

asterisk:cf:sip.conf

Wed, 07 Dec 2016 12:46:59 +0300

Настройка SIP в Asterisk - sip.conf ; ; SIP Configuration example for Asterisk ; ; Note: Please read the security documentation for Asterisk in order to ; understand the risks of installing Asterisk with the sample ; configuration. If your Asterisk is installed on a public ; IP address connected to the Internet, you will want to learn ; about the various security settings BEFORE you start ; Asterisk. ; ; Especially note the following settings: ; - allowguest (default enabled) ; - permit/den…

asterisk:cf:sip_notify.conf

Sat, 12 Nov 2016 19:19:21 +0300

asterisk:cf:skinny.conf

Sat, 12 Nov 2016 19:19:37 +0300

; ; Skinny Configuration for Asterisk ; [general] bindaddr=0.0.0.0 ; Address to bind to bindport=2000 ; Port to bind to, default tcp/2000 dateformat=M-D-Y ; M,D,Y in any order (6 chars max) ; "A" may also be used, but it must be at the end. ; Use M for month, D for day, Y for year, A for 12-hour time. keepalive=120 ;authtimeout = 30 ; authtimeout specifies the maximum number of seconds a ; client has to authenticate. If the client does not ; authenticate beofre this timeout …

asterisk:cf:sla.conf

Sat, 12 Nov 2016 19:19:48 +0300

; ; Configuration for Shared Line Appearances (SLA). ; ; See http://wiki.asterisk.org or doc/AST.pdf for more information. ; ; ---- General Options ---------------- [general] ;attemptcallerid=no ; Attempt CallerID handling. The default value for this ; is "no" because CallerID handling with an SLA setup is ; known to not work properly in some situations. However, ; feel free to enable it if you would …

asterisk:cf:smdi.conf

Sat, 12 Nov 2016 19:20:00 +0300

; Asterisk SMDI configuration [interfaces] ; Specify serial ports to listen for SMDI messages on below. These will be ; referenced later in chan_dahdi.conf. If you do not specify any interfaces ; then SMDI will be disabled. Interfaces can have several different attributes ; associated with them. ; Set the number of stop bits to use per character here. The default is no, ; in which case one stop bit will be used. ;twostopbits = no ; Character size or bit length is the size of each charact…

asterisk:cf:sorcery.conf

Sat, 12 Nov 2016 19:20:14 +0300

; Sample configuration file for Sorcery Data Access Layer ; ; Wizards ; ; Wizards are the persistence mechanism for objects. They are loaded as Asterisk modules and register ; themselves with the sorcery core. All implementation specific details of how objects are persisted is isolated ; within wizards. ; ; ; Caching ; ; A wizard can optionally be marked as an object cache by adding "/cache" to the object type within the mapping. ; If an object is returned from a non-object cache it is immedia…

Порядок выбора нужного екстеншена при ...

Wed, 14 May 2014 10:41:58 +0300

Порядок выбора нужного екстеншена при использовании шаблонов. Каждый контекст, определенный в плане набора указывает Asterisk, как обрабатывать телефонные номера, вызовы на которые попадают в данный контекст.

asterisk:cf:ss7.timers

Sat, 12 Nov 2016 19:20:37 +0300

;;;;; ITU-T Q.707 timers ;mtp3_timer.q707_t1 = 4000 ;mtp3_timer.q707_t2 = 30000 ;;;;; MTP3 timers as specified in ITU-T Q.704 or ANSI T1.111-2001 mtp3_timer.t1 = 500 mtp3_timer.t2 = 700 mtp3_timer.t3 = 500 mtp3_timer.t4 = 500 mtp3_timer.t5 = 500 mtp3_timer.t6 = 500 mtp3_timer.t7 = 1000 mtp3_timer.t10 = 60000 mtp3_timer.t12 = 800 mtp3_timer.t13 = 800 mtp3_timer.t14 = 2000 ; enable for ITU only. Timers after T17 are defined differently for ANSI ;mtp3_timer.t19 = 67000 ;mtp3_timer.t21 = 63000…

Asterisk Dialplan:Стандартные расширения

Sat, 17 Dec 2016 18:05:40 +0300

Asterisk Dialplan:Стандартные расширения Расширение диалплана Asterisk (екстеншен) представляет из себя идентификатор, числовое или буквенное выражение, которое вызывается в контексте диалплана.

asterisk:cf:stasis.conf

Sat, 12 Nov 2016 19:22:04 +0300

[threadpool] ;initial_size = 5 ; Initial size of the threadpool. ; ; 0 means the threadpool has no threads initially ; ; until a task needs a thread. ;idle_timeout_sec = 20 ; Number of seconds a thread should be idle before ; ; dying. 0 means threads never time out. ;max_size = 50 ; Maximum number of threads in the Stasis threadpool. ; ; 0 means no limit to the number of t…

asterisk:cf:statsd.conf

Sat, 12 Nov 2016 19:21:30 +0300

[general] ;enabled = yes ; When set to yes, statsd support is enabled ;server = 127.0.0.1 ; server[:port] of statsd server to use. ; If not specified, the port is 8125 ;prefix = ; Prefix to prepend to all metrics ;add_newline = no ; Append a newline to every event. This is ; useful if you want to run a fake statsd ; server using netcat (nc -lu 8125)

asterisk:cf:test_sorcery.conf

Sat, 12 Nov 2016 19:21:43 +0300

; This is a res_sorcery_config compatible file for the sorcery unit tests [hey] bob=98 joe=41 [hey2] type=zombies bob=97 joe=40 [hey3] bob=96 joe=39

asterisk:cf:udptl.conf

Sat, 12 Nov 2016 19:22:30 +0300

; ; UDPTL Configuration (UDPTL is one of the transports for T.38) ; [general] ; ; UDPTL start and UDPTL end configure start and end addresses ; udptlstart=4000 udptlend=4999 ; ; Whether to enable or disable UDP checksums on UDPTL traffic ; ;udptlchecksums=no ; ; The number of error correction entries in a UDPTL packet ; udptlfecentries = 3 ; ; The span over which parity is calculated for FEC in a UDPTL packet ; udptlfecspan = 3 ; ; Some VoIP providers will only accept an offer with an even-numbe…

asterisk:cf:unistim.conf

Sat, 12 Nov 2016 19:22:45 +0300

; ; chan_unistim configuration file. ; [general] port=5000 ; UDP port ; ; See https://wiki.asterisk.org/wiki/display/AST/IP+Quality+of+Service for a description of these parameters. ;tos=cs3 ; Sets TOS for signaling packets. ;tos_audio=ef ; Sets TOS for RTP audio packets. ;cos=3 ; Sets 802.1p priority for signaling packets. ;cos_audio=5 ; Sets 802.1p priority for RTP audio packets. ; ;debug=yes ; Enable debug (…

asterisk:cf:users.conf

Sat, 12 Nov 2016 19:23:00 +0300

; ; User configuration ; ; Creating entries in users.conf is a "shorthand" for creating individual ; entries in each configuration file. Using users.conf is not intended to ; provide you with as much flexibility as using the separate configuration ; files (e.g. sip.conf, iax.conf, etc) but is intended to accelerate the ; simple task of adding users. Note that creating individual items (e.g. ; custom SIP peers, IAX friends, etc.) will allow you to override specific ; parameters within this file…

asterisk:cf:voicemail.conf

Sat, 12 Nov 2016 19:23:30 +0300

; ; Voicemail Configuration ; ; ********* NOTICE ************************************************************ ; ; NOTE: Asterisk has to edit this file to change a user's password. This does ; not currently work with the "#include " directive for Asterisk ; configuration files, nor when using realtime static configuration. ; Do not use them with this configuration file. ; ; NOTE: Mailboxes defined by app_voicemail MUST be referenced by the rest ; of the system as mailbox@context. The res…

asterisk:cf:vpb.conf

Sat, 12 Nov 2016 19:23:45 +0300

; ; Voicetronix Voice Processing Board (VPB) telephony interface ; ; Configuration file ; [general] ; ; Total number of Voicetronix cards in this machine ; cards=0 ; ; Which indication functions to use ; 1 = use Asterisk functions ; 0 = use VPB functions ; indication=1 ; ; Echo Canceller suppression threshold ; 0 = no suppression threshold ; 2048 = -18dB ; 4096 = -24dB ; ;ecsuppthres=0 ; ; Inter-digit delay timeout, used when collecting DTMF tones for dialling ; from a stat…

asterisk:cf:xmpp.conf

Sat, 12 Nov 2016 19:24:10 +0300

[general] ;debug=yes ; Enable debugging (disabled by default). ;autoprune=yes ; Auto remove users from buddy list. Depending on your ; setup (ie, using your personal Gtalk account for a test) ; you might lose your contacts list. Default is 'no'. ;autoregister=yes ; Auto register users from buddy list. ;collection_nodes=yes ; Enable support for XEP-0248 for use with ; distributed device state. Default is 'no'. ;pubsub_autocreate=yes ; Whether or not the PubSub server s…

zapata.conf

Sat, 16 Aug 2014 14:48:45 +0300

zapata.conf это устаревший файл см. для более актуальной информации Настройка DAHDI - chan_dahdi Модуль канала Zap позволяет серверу Asterisk общаться с драйвером устройства Zaptel, который используется для работы с интерфейсными картами от Digium? или Sangoma?. В файле конфигурации zapata.conf используется для описания и настройки ZAP каналов, которые использует сервер Asterisk.…

Конфигурация драйвера ядра Zaptel (zaptel.conf)

Tue, 09 Feb 2010 23:20:26 +0300

Конфигурация драйвера ядра Zaptel (zaptel.conf) В файле zaptel.conf Вы настраиваете параметры интерфейса TDM, которые необходимы для Ваших карт от фирмы Digium или Sangoma?. Этот файл используется программой /sbin/ztcfg. Оба файла

Информация о процессе перехода с Zaptel версии 1.2 или 1. ...

Tue, 09 Feb 2010 23:21:12 +0300

Информация о процессе перехода с Zaptel версии 1.2 или 1.4 на DAHDI Процесс перехода с Zaptel на DAHDI довольно таки простой и прямолинейный. Установите пакет