Put a call into the holding bridge.


This application places the incoming channel into a holding bridge. The channel will then wait in the holding bridge until some event occurs which removes it from the holding bridge. NOTE: This application will answer calls which haven't already been answered.





  Name of the holding bridge to join. This is a handle for 'BridgeWait'
  only and does not affect the actual bridges that are created. If not
  provided, the reserved name 'default' will be used.


  Defines the channel's purpose for entering the holding bridge. Values
  are case sensitive.
  participant - The channel will enter the holding bridge to be placed
  on hold until it is removed from the bridge for some reason. (default)
  announcer - The channel will enter the holding bridge to make
  announcements to channels that are currently in the holding bridge. While
  an announcer is present, holding for the participants will be suspended.


  m(class): The specified MOH class will be used/suggested for music
  on hold operations. This option will only be useful for entertainment
  modes that use it (m and h).
  e: Which entertainment mechanism should be used while on hold in
  the holding bridge. Only the first letter is read.
      m - Play music on hold (default)
      r - Ring without pause
      s - Generate silent audio
      h - Put the channel on hold
      n - No entertainment
  S(duration): Automatically exit the bridge and return to the PBX
  after *duration* seconds.

[See Also]

Not available

Команды диалплана Asterisk

  • asterisk/app/bridgewait.txt
  • Последние изменения: 2014/05/05